Tuesday, December 27, 2011

BMO Economics - Top Ten Interesting Facts of 2011 and Predictions for 2012

BMO Financial GroupBMO Financial Group

TSX : BMO
NYSE : BMO



December 26, 2011 09:00 ET



TORONTO, ONTARIO--(Marketwire - Dec. 26, 2011) - To celebrate the New Year, BMO's Deputy Chief Economist, Doug Porter, has offered up five interesting facts from 2011, and five predictions for 2012.

2011 INTERESTING FACTS:
Canada grew faster than Brazil in the past year. Despite a series of challenges both in Canada and globally, the Canadian economy likely grew 2.3 per cent, close to expectations and not far from its long-run average. Over the latest four quarters, GDP is up 2.4 per cent year-over-year, outpacing not just most major industrialized economies (the U.S. was up 1.5 per cent and the Eurozone 1.4 per cent), but even the 2.1 per cent advance in emerging market darling Brazil over the same period.

The Canadian dollar was the weakest currency in the G10 in the past year. Global investors were not so impressed with the Canadian dollar in 2011, driving the currency down more than 2 per cent on the year. So, not only did the loonie weaken against the U.S. dollar and the disaster-hit Japanese yen (which was in fact the strongest major currency this year), but even against the beleaguered euro.

The U.S. government faced its lowest borrowing costs since the early 1950s. Despite political difficulties throughout the year, the first credit rating downgrade of U.S. government debt in history, the intense focus on deficits and debt, and 3 per cent-plus inflation, 10-year Treasury yields averaged less than 2.8 per cent in 2011 and ended the year close to all-time lows around 2 per cent.

Gold was the top-performing commodity in 2011, but also a drag on the TSX. Despite record gold, silver and copper prices at various stages this year, and the early-year sprint in oil above $100, commodity prices sagged overall in 2011. For instance, the Commodity Research Bureau Index fell more than 8 per cent, with natural gas, nickel and lumber all down more than 20 per cent (all are important commodities for Canada). Accordingly, the materials sector was the second weakest in the TSX this year ("topped" only by tech), with even gold stocks down more than 15 per cent.

Canadian inflation rose at the fastest pace in 20 years in 2011. With one month to go, it looks like the consumer price index will rise by almost 3 per cent this year, the fastest annual increase since 1991 (the year of the GST and the year the Bank of Canada began targeting inflation). This year's increase was pumped up by sales tax increases, but even ex-tax inflation was nearly 2.5 per cent, despite a soggy economy and a lingering output gap.

2012 PREDICTIONS:
The North American economy will decouple from recession in Europe. There are two distinct calls here: European GDP will contract roughly 1 per cent in 2012, after growing 1.5 per cent in 2011; and North America will partly avoid the downdraft. The most encouraging development in recent months is the ability of the U.S. economy to gather modest momentum in the face of Europe's deepening woes. However, we continue to look for sub-par growth in both Canada and the U.S. of 2 per cent next year, keeping jobless rates little changed. Notably, the U.S. economy should grow faster than Canada for the first time in seven years.

Housing will add to U.S. growth in 2012. After declining relentlessly for six consecutive years, and dropping to a record low of barely a 2 per cent share of GDP, residential construction is finally poised to add - albeit slightly - to U.S. growth next year. Homebuilder sentiment is slowly improving, home sales are creeping off the bottom, and rising rents are spurring construction of multiple-unit buildings. In a related development, we also look for consumer spending to grow faster in the U.S. than in Canada for the second year in a row. With U.S. job growth finally catching up to Canada, and plenty of pent-up demand, there is simply more runway for U.S. consumers.

The Bank of Canada will have its longest period of inactivity since the 1950s. Given the sluggish external growth backdrop and a tapped-out domestic consumer, as well as a Fed that seems poised to lower interest rates in the next 18 months, we see the Bank of Canada on hold through 2012. In fact, there is likely more chance of a Bank of Canada rate cut than a hike in the next year. But note that the Bank of Canada was the only G10 central bank that did not take any easing steps in 2011. If the Bank of Canada does stand aside, that would leave rates on hold for at least 28 months, the longest stretch of stable Canadian interest rates since the early 1950s.

China's trade surplus will narrow markedly. With inflation pressures finally cracking, and growth prospects in the rest of the world sagging notably, China's policymakers took initial steps to ease monetary policy in late 2011. There should be more aggressive easing next year which, combined with a 5 per cent appreciation of the yuan in the past year and weaker demand from Europe, should help cut into the trade surplus next year.

Vancouver will not be the hottest housing market in Canada in 2012. Despite the intense focus on the city as a bubble candidate as far back as 2010, Vancouver still saw the biggest average price increases (+16 per cent) and the biggest real estate volume gains (sales & price gains combined) in Canada this year. That won't be repeated next year - there are already clear signs that sales are dipping, and price increases are starting to ebb. Toronto has seized the mantle of hottest major market in recent months, and appears to be at some risk of overheating. Meantime, the award for most well-behaved market is a tie between Calgary and Edmonton, which have seen stable prices in recent years even as Alberta easily recorded the strongest employment growth in the country in 2011. Assuming oil prices hold around $90 or better, look for those two cities to lead the way for hottest housing markets in 2012.

The complete article can be seen in BMO Economics' Focus feature, at http://www.bmonesbittburns.com/economics/focus/recent/111223doc.pdf.
(Note: all data accurate as at December 22, 2011)

Contact Information


Media contacts:
Peter Scott
416-867-3996
PeterE.Scott@bmo.com

Ronald Monet
514-877-1873
ronald.monet@bmo.com

Laurie Grant
laurie.grant@bmo.com
604-665-7596
Enhanced by Zemanta

Friday, December 23, 2011

Rodinia Lithium solidifies resource estimate!

RODINIA LITHIUM FILES FAVOURABLE PRELIMINARY ECONOMIC ASSESSMENT TECHNICAL REPORT
  • FAVOURABLE PEA TECHNICAL REPORT FILED ON SEDAR
     
  • NO MATERIAL DIFFERENCES FROM RESULTS ANNOUNCED IN PRESS RELEASE DATED NOVEMBER 7, 2011
     
  • PEA CONTAINS A COMPREHENSIVE SUB-SURFACE SALAR MODEL TO END GATE BREAKDOWN OF THE DIABLILLOS LITHIUM BRINE PROJECT WITH PRE-TAX NPV OF US$561 MILLION FOR 15,000 TPA LITHIUM CARBONATE AND US$964 MILLION FOR A 25,000 TPA LITHIUM CARBONATE OPTION
Toronto, Canada, December 23, 2011: Rodinia Lithium Inc. (“Rodinia” or the “Company”) (TSX-V: RM; OTCQX: RDNAF) is pleased to announce that the Company has filed a National Instrument 43-101-compliant Technical Report dated December 22, 2011, effective as of November 8, 2011 entitled “NI 43-101 Technical Report Preliminary Economic Assessment Salar de Diablillos Project Salta, Argentina”, prepared by SRK Consulting (U.S.) Inc. (the “Report”) under the Company’s profile on SEDAR at www.sedar.com.  The Report contains a comprehensive sub-surface to end gate breakdown of Rodinia’s Preliminary Economic Assessment (“PEA”) on the 100% owned Salar de Diablillos lithium brine project (“Diablillos” or “Salar”) located in Salta Province, Argentina, the results of which were announced in a press release dated November 7, 2011.
The Report includes:
  • Detailed geological overview and sub-surface brine model
  • Preliminary processing flow sheets and site layout
  • Overview of connections to key infrastructure including, water, power and transportation
  • Sensitivities of the project to changes in lithium carbonate price, operating and capital costs
  • High level project development schedule
There are no material differences between the results announced in the press release dated November 7, 2011 and the final PEA.
PEA Highlights (all currency is US$, pre-tax)
The PEA outlines an operation producing 15,000 tonnes lithium carbonate (“LC”) per year and approximately 51,000 tonnes of KCl (“potash”) per year, projecting a 34% internal rate of return (“IRR”) pre-tax and a $561 million pre-tax net present value (“NPV”) at an 8% discount rate.  The PEA also outline’s Rodinia’s available option to increase production to 25,000 tonnes LC and 85,000 tonnes potash per year.  This increased production scenario generates a much higher pre-tax NPV estimate of $964 million, along with a pre-tax IRR of 36%.  A summary of the key economic findings, as reported in the November 7, 2011 press release, includes:
Production Case: 15,000 tpa LC 25,000 tpa LC
NPV at 8% discount rate $561 million $964 million
IRR 34% 36%
Total Initial Capital Costs $144 million $220 million
Operating Costs per tonne LC* $1,519 $1,486
Operating Costs per tonne LC with potash and boric acid credits ($703) ($762)
Operating Costs per tonne KCl* $170 $160
Average annual free cash flow* $89 million $150 million
Mine life 20+ 20+
Annual production rate of potash* 51,000 85,000
Annual production rate of boric acid* 18,000 31,000
Projected commencement of production 2015 2015
Years to payback 1.6 years 1.5 years
*Averaged using years of full production, discounting ramp up period.
*Assumes average sale price of US$5,500/t LC; US$620/t KCl; and US$1,150/t boric acid.
The PEA is preliminary in nature, includes inferred brine resources that are considered too speculative geologically to have the economic considerations applied to them that would enable them to be categorized as mineral reserves, and there is no certainty that the estimates of the PEA will be realized.
About Rodinia Lithium Inc.:
Rodinia Lithium Inc. is a Canadian mineral exploration and development company with a primary focus on Lithium exploration and development in North and South America.  The Company is also actively exploring the commercialization of a significant Potash co-product that is expected to be recoverable through the lithium harvesting process.
Rodinia’s Salar de Diablillos lithium-brine project in Salta, Argentina, contains a recoverable resource of 2.82 million tonnes lithium carbonate equivalent and 11.27 million tonnes potassium chloride equivalent.  The project contains a recoverable inferred resource of 952,553,000 m3 grading 556 mg/L lithium and 6,206 mg/L potassium. Throughout 2011, Rodinia will focus on continuing to develop the Diablillos project by completing additional drilling and advancing through scoping study.
The Company also holds 100% mineral rights to approximately 70,000 acres in Nevada’s lithium-rich Clayton Valley in Esmeralda County, and is currently in the process of assessing the size, quality and processing alternatives of this deposit.  The Clayton Valley project is located in the only known lithium-brine bearing salt lake in North America, and looks to represent the only new source for domestic lithium carbonate supply.
The Projects are supervised by Ray Spanjers, Rodinia’s Manager of Exploration. Mr. Spanjers is considered a Qualified Person, as defined by National Instrument 43‐101.
Please visit the Company’s web site at www.rodinialithium.com or write us at info@rodinialithium.com
For further information please contact
Investor Cubed Inc.   Aaron Wolfe
Investor Relations   Vice-President, Corporate Development
Tel: +1 (647) 258-3311  Tel: +1 (416) 309-2696
Cautionary Notes
Except for statements of historical fact contained herein, the information in this press release constitutes “forward-looking information” within the meaning of Canadian securities law. Such forward-looking information may be identified by words such as “plans”, “proposes”, “estimates”, “intends”, “expects”, “believes”, “may”, “will” and include without limitation, statements regarding the impact of the drill program at the Diablillos property and results of such drill program; the potential of the Diablillos property; anticipated timing with respect to the development of the Diablillos property, the potential results and timetable for further exploration with respect to the Clayton Valley project and the Diablillos property, the timetable with respect to future acquisitions and exploration developments at Clayton Valley and Diablillos, timetable for further exploration, analysis and development, title disputes or claims; and governmental approvals and regulation. There can be no assurance that such statements will prove to be accurate; actual results and future events could differ materially from such statements.  Factors that could cause actual results to differ materially include, among others, metal prices, competition, financing risks, acquisition risks, risks inherent in the mining industry, and regulatory risks. Most of these factors are outside the control of the Company. Investors are cautioned not to put undue reliance on forward-looking information. Except as otherwise required by applicable securities statutes or regulation, the Company expressly disclaims any intent or obligation to update publicly forward-looking information, whether as a result of new information, future events or otherwise.
NEITHER THE TSX VENTURE EXCHANGE NOR ITS REGULATION SERVICES PROVIDER (AS THAT TERM IS DEFINED IN THE POLICIES OF THE TSX VENTURE EXCHANGE) ACCEPTS
Enhanced by Zemanta

Thursday, December 22, 2011

Talison negotiates 15% increase in price for lithium through 2012!

Talison Lithium LimitedTalison Lithium Limited

TSX : TLH




December 22, 2011 08:23 ET

Talison Lithium Concludes Negotiations for H1 CY12 Sales and Achieves a 15% Price Increase for All Products



PERTH, WESTERN AUSTRALIA--(Marketwire - Dec. 22, 2011) -
First Half Calendar 2012 Sales
Talison Lithium Limited ("Talison" or the "Company") (TSX:TLH) advises that it has concluded negotiations with its customers with regards to first half calendar 2012 sales. A price increase of 15% has been agreed with customers across Talison's entire product range. Approximately 75% of sales for the period have been contracted with the balance to be sold to other customers who typically contract on a shipment by shipment basis.

Bunbury Port Congestion
Due to berth closures and unplanned Port outages there is currently significant congestion at the Port of Bunbury impacting all Port users. This may result in approximately 38,000 tonnes of Talison's lithium concentrate sales that were ready at the Port for shipment earlier this month being delayed into early January 2012. A delay would reduce sales for the December quarter but is not expected to affect sales for the 2012 fiscal year.

1 Year Injury Free
Talison has recently passed an important milestone of one year lost time injury (LTI) free days at its Greenbushes Lithium Operations. This was achieved through the commitment of all employees and contractors towards safety. The milestone is especially notable as it was achieved during the presence of a large additional workforce on site as part of the current expansion of the Greenbushes Lithium Operations.

About Talison
Talison is a leading global producer of lithium. Talison has been producing lithium concentrate for a global customer network from the Greenbushes Lithium Operations in Western Australia for over 25 years. In addition, Talison explores for lithium at the Salares 7 lithium project made up of seven salars located in Region III, Chile.

Cautionary Note Regarding Forward-Looking Statements
Certain information contained in this press release, including any information as to Talison's mineral reserve and mineral resource estimates, strategy, projects, plans, prospects, future outlook, anticipated events or results or future financial or operating performance, may constitute "forward-looking information" within the meaning of Canadian securities laws. All statements, other than statements of historical fact, constitute forward-looking information. Forward-looking information can often, but not always, be identified by the use of words such as "plans", "expects", "is expected", "budget", "scheduled", "estimates", "forecasts", "intends", "anticipates", "predicts", "potential", "continue" or "believes", or variations (including negative variations) of such words, or statements that certain actions, events or results "may", "could", "would", "should", "might", "potential to", or "will" be taken, occur or be achieved or other similar expressions concerning matters that are not historical facts. The purpose of forward-looking information is to provide the reader with information about management's expectations and plans. Readers are cautioned that forward-looking statements are not guarantees of future performance. All forward-looking statements made or incorporated in this press release are qualified by these cautionary statements.
Forward-looking statements are necessarily based on a number of factors, estimates and assumptions that, while considered reasonable by Talison, are inherently subject to significant business, economic and competitive uncertainties and contingencies. Such factors, estimates and assumptions include, but are not limited to: anticipated financial and operating performance of Talison, its subsidiaries and their respective projects; Talison's market position; future prices of lithium or lithium concentrates; estimation of mineral reserves and mineral resources; realization of mineral reserve and mineral resource estimates; timing, amount and costs of estimated future production; grade, quality and content of concentrate produced; sale of production; capital, operating and exploration expenditures; costs and timing of the expansion of the Greenbushes Lithium Operations; exploration and development of the Salares 7 lithium project; costs and timing of future exploration; requirements for additional capital; government regulation of exploration, development and mining operations; environmental risks; reclamation and rehabilitation expenses; title disputes or claims; absence of significant risks relating to Talison's mining operations; the costs of Talison's hedging policy; sales risks related to China; currency; interest rates, and limitations of insurance coverage. While Talison considers these factors, estimates and assumptions to be reasonable based on information currently available to it, they may prove to be incorrect and actual results may vary.
Readers are cautioned that forward-looking information involves known and unknown risks, uncertainties and other factors which may cause the actual results, performance or achievements of Talison and/or its subsidiaries to be materially different from any future results, performance or achievements expressed or implied by the forward-looking information. Such risk factors include, amount others, those described in the unaudited condensed consolidated interim financial statements of Talison and the related notes thereto as at September 30, 2011 and for the three months ended September 30, 2011 and under the heading "Risk Factors" in the annual information form of Talison for the year ended June 30, 2011 dated September 23, 2011, each of which can be found on Talison's SEDAR profile at www.sedar.com. While Talison considers these assumptions to be reasonable based on information currently available to it, they may prove to be incorrect and actual results may vary.
Although Talison has attempted to identify statements containing important factors that could cause actual actions, event or results to differ materially from those described in forward-looking information, there may be other factors that cause actions, events or results to differ from those anticipated, estimated or intended. Forward-looking information contained herein is made as of the date of this press release based on the opinions and estimates of management on the date statements containing such forward-looking information are made. Except as required by law, Talison disclaims any obligation to update any forward-looking information, whether as a result of new information, estimates or opinions, future events or results or otherwise. There can be no assurance that forward-looking information will prove to be accurate, as actual results and future events could differ materially from those anticipated in such information. Accordingly, readers should not place undue reliance on forward-looking information.

Contact Information


Investor Relations:
ICR, LLC
Gary T. Dvorchak, CFA
Senior Vice President
+1 (310) 954-1123
Gary.Dvorchak@icrinc.com
Enhanced by Zemanta

Tuesday, December 20, 2011

San Gold announces the richest gold discovery in Manitoba history!

San Gold CorporationSan Gold Corporation

TSX : SGR
 Nasdaq  OTCQX : SGRCF




December 20, 2011 09:22 ET

San Gold Reviews Over 200 Drill Holes from 2011 007 Zone Drilling



WINNIPEG, MANITOBA--(Marketwire - Dec. 20, 2011) - San Gold Corporation (TSX:SGR)(OTCQX:SGRCF) today announced the results of drilling conducted since January in the 007 Zone of the company's Rice Lake Mining Complex in Manitoba, Canada.

Drilling on the 007 Zone occurred throughout the year, from surface and underground drilling stations, in order to infill and extend the zone both along strike and to depth. At the beginning of 2011, the 007 Zone had a limited strike length of less than 200 m. A second new zone, then known as Emperor, was located approximately 300 m to the east along the same horizon. Drilling during the year to the east of 007 resulted first in the discovery of 007 East(730 zone) and then 007 Far East(740 zone). As drilling progressed during the year, it was determined that all four zones including the Emperor were part of a continuous stretch of mineralization extending about 500 m (1,640 feet) along strike.

Results obtained from the 2011 drilling program demonstrate consistent grades and widths throughout the 007 Zone, as highlighted by the following drill holes:
  • S922-11-036, intersecting 23.2 g/tonne over 11.5 metres at a depth of 362 metres
  • S922-11-013, intersecting 110.1 g/tonne over 2.1 metres at a depth of 330 metres
  • S922-11-049, intersecting 44.2 g/tonne over 4.3 metres at a depth of 348 metres
  • S922-11-089, intersecting 63.0 g/tonne over 2.8 metres at a depth of 362 metres
  • S922-11-091, intersecting 21.7 g/tonne over 7.4 metres at a depth of 362 metres
  • S915-11-003, intersecting 11.8 g/tonne over 12.3 metres at a depth of 396 metres
  • S915-11-024, intersecting 60.7 g/tonne over 3.0 metres at a depth of 275 metres
  • S915-11-045, intersecting 45.6 g/tonne over 4.3 metres at a depth of 291 metres
  • S915-11-084, intersecting 17.4 g/tonne over 9.4 metres at a depth of 269 metres
  • S915-11-106, intersecting 18.1 g/tonne over 3.2 metres at a depth of 358 metres
"These results provide a detailed account of one of the richest gold deposits ever discovered in Manitoba. It's extremely impressive that a gold deposit that wasn't even known about two years ago will be contributing 50% of our mill feed well into the foreseeable future," said George Pirie, San Gold's President and Chief Executive Officer.

The 007 Zone is located along and within the Shoreline Basalt rock unit. San Gold views the full length of the Shoreline Basalt and similar parallel rock units as extremely prospective. In 2012, San Gold's drilling program will pursue the 007 Zone westward towards the L10 Zone, a region that has already returned encouraging results. San Gold will also pursue 007 to the east toward the SG-1 Zone, another Shoreline Basalt deposit located 2 km northeast of the 007 Zone. The region between 007 and SG-1 has yet to be significantly drill tested.

The drilling released today covers 261 intercepts over 215 drill holes within the 007 mineralized envelop. 17 of these holes have been released previously and are included here to provide a complete summary of the 007 drilling program in 2011. The full listing of the drill holes can be found in Table 1 of this release. Figures 1 to 5, which illustrate the location of drill holes and intercepts, can be found on the company web site (www.sangold.ca) and on SEDAR (www.sedar.com).

2011 Exploration Program
This drilling was carried out as part of San Gold's 2011 drill program. As of the end of October, the company had completed 300,000 metres of drilling within the Rice Lake Mining Complex. The Company's near-surface exploration activities in 2011 have focused on both exploration and definition drilling along the 007 Zone and within the L10, L13, SG-1 and Cohiba zones. Deep drilling has focused on extensions of the L10 and 007 zones, both from surface and from drilling stations on 16 Level and 26 Level in the Rice Lake Mine. Drilling within the Rice Lake Mine has focused primarily on definition drilling on 26, 28 and 31 Levels.
The surface drill program was carried out under the supervision of W.S. Ferreira, P.Geo., the Qualified Person for this project under National Instrument 43-101. The drill core was split, with half sent to TSL Laboratories in Saskatoon, SK and fire assayed with an AA and gravimetric finish. Whole metallic assays were performed on samples containing visible gold. Check assays were also performed on pulps and rejects by both TSL and by Accurassay Laboratories of Thunder Bay, ON. The underground drill program was carried out by San Gold mine geologists under the supervision of D. Ginn, P.Geo., the Qualified Person for San Gold under National Instrument 43-101. Underground drill core samples are assayed on site in the company's assay lab using the fire assay method with an AA and gravimetric finish. San Gold's quality control and assurance program includes the insertion of standards, the retention of pulps and rejects, and spot checks utilizing independent labs including TSL Laboratories in Saskatoon, SK and Accurassay Laboratories of Thunder Bay, ON. The core lengths are actual lengths as drilled and have not been adjusted for the true width of the mineralized zones.

About San Gold
San Gold is an established Canadian gold producer, explorer, and developer that owns and operates the Hinge, 007, and Rice Lake mines near Bissett, Manitoba. The Company employs more than 400 people and is committed to the highest standards of safety and environmental stewardship. San Gold is on the Toronto Stock Exchange under the symbol "SGR" and on the OTCQX under the symbol "SGRCF".

Cautionary Note
No stock exchange, securities commission or other regulatory authority has approved or disapproved the information contained herein. This news release includes certain "forward-looking statements". All statements, other than statements of historical fact included in this release, including, without limitation, statements regarding forecast gold production, gold grades, recoveries, cash operating costs, potential mineralization, mineral resources, mineral reserves, exploration results, and future plans and objectives of the Company, are forward-looking statements that involve various risks and uncertainties. These forward-looking statements include, but are not limited to, statements with respect to mining and processing of mined ore, achieving projected recovery rates, anticipated production rates and mine life, operating efficiencies, costs and expenditures, changes in mineral resources and conversion of mineral resources to proven and probable mineral reserves, and other information that is based on forecasts of future operational or financial results, estimates of amounts not yet determinable and assumptions of management.
Any statements that express or involve discussions with respect to predictions, expectations, beliefs, plans, projections, objectives, assumptions or future events or performance (often, but not always, using words or phrases such as "expects" or "does not expect", "is expected", "anticipates" or "does not anticipate", "plans", "estimates" or "intends", or stating that certain actions, events or results "may", "could", "would", "might" or "will" be taken, occur or be achieved) are not statements of historical fact and may be "forward-looking statements." Forward-looking statements are subject to a variety of risks and uncertainties that could cause actual events or results to differ from those reflected in the forward-looking statements.
There can be no assurance that forward-looking statements will prove to be accurate and actual results and future events could differ materially from those anticipated in such statements. Important factors that could cause actual results to differ materially from the Company's expectations include, among others, the actual results of current exploration activities, conclusions of economic evaluations and changes in project parameters as plans continue to be refined as well as future prices of precious metals, as well as those factors discussed in the section entitled "Other MD&A Requirements and Additional Disclosure and Risk Factors" in the Company's most recent quarterly Management's Analysis and Discussion ("MD&A"). Although the Company has attempted to identify important factors that could cause actual results to differ materially, there may be other factors that cause results not to be as anticipated, estimated or intended. There can be no assurance that such statements will prove to be accurate as actual results and future events could differ materially from those anticipated in such statements. Accordingly, readers should not place undue reliance on forward-looking statements.
Exploration results that include geophysics, sampling, and drill results on wide spacings may not be indicative of the occurrence of a mineral deposit. Such results do not provide assurance that further work will establish sufficient grade, continuity, metallurgical characteristics, and economic potential to be classed as a category of mineral resource. A mineral resource that is classified as "inferred" or "indicated" has a great amount of uncertainty as to its existence and economic and legal feasibility. It cannot be assumed that any or part of an "indicated mineral resource" or "inferred mineral resource" will ever be upgraded to a higher category of resource. Investors are cautioned not to assume that all or any part of mineral deposits in these categories will ever be converted into proven and probable reserves.
Table 1: Full Listing of 007 Drilling Results (January-October 2011) (1)
Depth From To Length Au
Drill Hole metres g/tonne
Drilling Station 007-S915 UG
S915-11-001 200.3 65.7 66.0 0.3 3.2
S915-11-002 197.0 88.7 89.4 0.6 0.0
S915-11-003 395.9 157.6 169.9 12.3 11.8
S915-11-004 228.0 59.6 60.1 0.5 2.2
S915-11-006 280.9 75.6 76.5 0.9 0.3
S915-11-007 296.1 78.9 82.0 3.1 17.8
and 55.3 62.5 7.3 2.0
S915-11-008 314.6 96.3 120.2 23.9 1.3
incl 117.8 120.2 2.4 3.9
and 59.3 71.3 12.0 4.3
S915-11-009 207.3 55.3 61.0 5.7 4.3
incl 55.3 56.1 0.8 7.5
incl 58.6 59.0 0.3 29.1
S915-11-010 217.3 46.0 58.2 12.2 5.1
incl 50.0 56.4 6.4 9.0
S915-11-011 33.7 37.1 3.4 2.2
incl 34.1 34.9 0.8 7.4
incl 36.8 37.1 0.3 3.6
and 226.6 42.0 55.2 13.2 11.6
incl 49.5 55.2 5.7 24.5
S915-11-013 243.4 33.4 43.8 10.4 7.6
incl 33.8 43.8 10.0 7.2
incl 43.2 43.8 0.6 67.2
S915-11-014 278.3 50.7 63.2 12.5 11.6
incl 54.7 56.4 1.7 58.9
S915-11-015 293.2 69.4 74.6 5.2 2.2
S915-11-016 304.5 76.2 84.2 8.0 15.3
S915-11-017 331.6 99.3 103.1 3.8 8.0
and 345.6 115.6 124.7 9.1 13.1
S915-11-019 211.8 48.6 51.8 3.2 3.8
S915-11-020 221.6 44.3 46.8 2.4 4.9
S915-11-022 242.6 41.4 43.4 2.1 4.5
S915-11-023 No Significant Results
S915-11-024 274.5 50.0 52.9 3.0 60.7
S915-11-026 289.9 56.8 60.2 3.4 7.1
S915-11-027 313.3 75.1 78.9 3.8 4.6
and 322.8 87.8 91.6 3.8 6.0
S915-11-028 52.1 52.4 0.4 3.6
and 203.3 62.0 63.2 1.2 0.9
S915-11-030 33.2 37.8 4.6 7.2
incl 37.3 37.8 0.5 57.6
and 42.7 43.9 1.2 4.7
and 224.5 47.3 51.2 3.8 58.3
incl 49.0 49.3 0.3 607.4
S915-11-032 34.1 36.2 2.1 4.3
and 243.5 39.2 45.7 6.5 6.2
incl 39.2 40.7 1.5 17.5
S915-11-033 258.5 128.4 130.3 1.9 72.7
incl 128.4 128.9 0.5 282.1
and 257.7 133.4 142.1 8.7 7.9
incl 133.4 137.3 3.9 3.8
incl 135.7 137.3 1.6 7.0
incl 138.8 142.1 3.3 16.5
incl 138.8 140.5 1.7 30.0
and 149.5 150.5 1.0 4.9
S915-11-034 272.5 39.0 50.3 11.3 11.5
S915-11-035 291.9 57.0 62.6 5.6 7.6
S915-11-037 316.5 79.7 84.1 4.4 5.9
S915-11-038 42.4 45.2 2.8 3.1
incl 44.6 45.2 0.6 8.7
and 203.7 56.3 67.1 10.8 13.2
incl 57.5 58.1 0.6 31.4
incl 63.1 65.3 2.2 42.1
S915-11-040 226.4 41.1 49.5 8.4 14.3
incl 47.8 49.0 1.2 93.7
S915-11-042 240.5 41.6 44.4 2.8 33.6
S915-11-043 275.3 45.4 52.8 7.4 14.8
S915-11-045 290.8 56.9 61.2 4.3 45.6
S915-11-047 317.0 78.3 89.8 11.5 9.5
incl 79.7 87.4 7.7 11.6
S915-11-048 55.0 56.2 1.2 8.0
and 197.4 66.8 72.1 5.3 80.4
incl 66.9 70.3 3.4 119.9
S915-11-050 16.2 18.1 1.9 4.6
and 223.4 52.2 57.0 4.8 43.5
incl 55.6 57.0 1.4 144.2
S915-11-052 241.5 47.0 52.2 5.2 2.7
incl 47.0 47.5 0.5 8.6
and 240.2 54.2 54.8 0.6 13.4
S915-11-054 274.7 57.8 60.0 2.2 6.3
S915-11-055 320.6 111.9 114.4 2.5 6.3
S915-11-056 372.5 169.3 170.6 1.3 3.7
S915-11-057 233.5 151.0 155.8 4.8 7.7
S915-11-058 221.0 86.1 86.5 0.3 59.3
S915-11-059 240.9 62.5 62.5 0.0 0.0
and 93.5 94.5 1.0 7.1
S915-11-060 248.7 94.9 95.1 0.2 0.0
S915-11-061 262.2 66.8 67.5 0.7 0.0
S915-11-062 275.6 111.6 121.9 10.3 17.0
incl 115.0 118.2 3.2 42.2
S915-11-063 No Significant Results
S915-11-065 No Significant Results
S915-11-064 228.3 41.3 41.9 0.6 0.2
S915-11-066 217.0 51.9 54.3 2.3 0.3
S915-11-067 227.6 44.2 49.0 4.7 1.6
S915-11-068 202.2 61.6 64.5 2.9 4.4
S915-11-069 226.9 37.9 41.6 3.7 0.7
and 219.2 52.0 53.4 1.5 3.5
S915-11-070 230.8 35.8 36.6 0.7 0.0
S915-11-071 210.0 49.5 51.7 2.3 3.4
S915-11-072 228.0 32.8 33.2 0.4 41.7
S915-11-073 229.2 44.0 47.4 3.5 0.4
S915-11-074 208.2 50.0 52.9 2.8 3.9
S915-11-075 213.7 52.0 53.8 1.8 3.8
S915-11-076 245.4 12.5 13.9 1.4 4.1
and 230.7 40.7 41.6 1.0 1.3
S915-11-077 235.1 35.7 41.1 5.5 2.0
incl 35.7 37.8 2.1 3.6
S915-11-078 263.7 40.3 45.0 4.7 2.5
and 269.1 64.2 65.7 1.6 2.6
S915-11-079 No Significant Results 0.0
S915-11-080 207.9 68.5 73.5 4.9 3.2
incl 69.9 72.8 2.9 5.2
and 224.5 41.8 44.9 3.2 2.3
S915-11-081 235.3 52.7 55.4 2.8 1.8
S915-11-082 265.2 49.7 50.7 1.0 2.8
S915-11-083 285.6 68.6 69.6 1.0 0.0
S915-11-084 268.6 48.4 57.9 9.4 17.4
incl 48.4 52.1 3.7 35.6
incl 54.3 56.7 2.5 12.9
and 272.1 62.6 67.8 5.2 33.7
S915-11-085 No Significant Results
S915-11-086 No Significant Results
S915-11-087 No Significant Results
S915-11-088 No Significant Results
S915-11-089 250.5 6.8 9.0 2.2 0.3
S915-11-090 No Significant Results
S915-11-091 250.5 27.6 30.1 2.5 0.3
S915-11-092 262.9 33.9 35.2 1.3 36.2
and 267.4 50.3 50.5 0.3 17.7
S915-11-093 261.5 30.0 30.7 0.7 34.0
and 263.7 36.1 37.6 1.5 3.9
and 266.7 45.7 46.7 1.0 51.7
S915-11-094 260.6 24.2 27.4 3.3 7.7
and 267.0 39.4 47.7 8.2 58.4
incl 43.9 47.7 3.7 124.8
S915-11-100 330.1 130.5 131.4 0.9 0.3
S915-11-102 193.5 75.4 77.1 1.6 1.8
S915-11-105 339.5 108.7 113.4 4.7 20.3
S915-11-106 357.5 124.2 127.4 3.2 18.1
S915-11-107 345.9 106.8 111.7 4.9 29.2
S915-11-108 347.2 103.2 110.2 7.0 9.2
S915-11-109 351.7 110.1 112.0 1.9 1.7
S915-11-110 373.1 134.8 136.7 1.9 15.7
Drilling Station 007-S922 UG
S922-11-001 300.8 126.5 128.4 1.9 0.1
S922-11-002 312.3 118.7 119.9 1.3 48.6
S922-11-003 328.8 121.0 122.8 1.7 16.3
S922-11-004 300.2 114.7 117.0 2.3 7.6
S922-11-005 315.2 115.1 117.3 2.2 1.7
S922-11-007 297.5 117.0 118.8 1.8 1.4
S922-11-008 308.5 116.0 118.9 2.8 0.8
S922-11-009 324.0 117.5 120.1 2.6 1.6
S922-11-010 300.8 110.2 112.3 2.1 0.3
S922-11-011 312.7 109.9 113.3 3.4 4.0
S922-11-012 311.2 112.0 112.7 0.7 7.1
S922-11-013 329.8 117.0 119.1 2.1 110.1
S922-11-014 298.1 115.3 116.6 1.3 12.2
S922-11-015 321.6 111.7 114.8 3.2 3.1
S922-11-016 310.9 120.8 129.4 8.6 0.6
S922-11-017 333.1 128.9 132.3 3.5 4.0
S922-11-018 300.5 137.9 139.4 1.5 0.2
S922-11-019 311.2 122.8 127.0 4.3 2.3
S922-11-020 321.4 118.3 120.5 2.2 1.5
S922-11-021 290.6 144.8 145.6 0.8 6.1
and 296.6 160.4 161.1 0.7 24.8
S922-11-022 321.2 157.2 159.9 2.7 4.8
S922-11-023 331.9 148.9 153.0 4.1 2.3
incl 151.6 152.8 1.1 6.1
S922-11-024 295.1 147.2 151.3 4.1 4.7
S922-11-025 315.8 155.0 157.0 2.0 5.7
S922-11-026 331.9 180.9 189.3 8.5 4.2
incl 180.9 181.6 0.8 11.6
incl 184.6 185.8 1.2 16.4
S922-11-029 327.2 178.6 183.1 4.5 5.5
S922-11-030 349.8 131.2 134.0 2.8 8.2
incl 131.2 131.5 0.3 62.3
S922-11-034 57.6 57.8 0.2 12.0
and 124.1 126.9 2.8 1.3
S922-11-035 338.6 119.7 122.6 2.9 11.4
S922-11-036 362.4 132.3 143.8 11.5 23.2
incl 132.3 140.0 7.7 33.0
S922-11-038 290.2 157.5 158.5 1.0 2.6
and 170.0 170.7 0.6 5.5
S922-11-039 326.7 154.0 154.3 0.3 1.0
and 329.4 158.9 159.6 0.7 0.9
S922-11-040 136.7 137.3 0.7 3.6
and 343.0 146.2 149.9 3.7 6.9
incl 146.9 149.9 3.0 8.7
S922-11-042 343.0 154.5 154.6 0.0 0.0
and 175.0 178.5 3.5 2.7
and 175.0 175.6 0.6 6.9
and 176.9 177.5 0.7 3.9
S922-11-043 282.2 171.0 176.9 5.9 9.2
S922-11-044 301.8 148.4 151.6 3.2 5.2
S922-11-045 333.1 156.0 157.3 1.3 4.6
S922-11-046 343.5 150.9 157.5 6.6 1.3
S922-11-047 351.1 133.2 134.1 0.9 185.3
and 362.5 144.8 148.5 3.7 11.4
S922-11-048 372.5 147.5 148.6 1.2 1.1
S922-11-049 348.1 132.6 136.8 4.3 44.2
S922-11-050 364.5 144.4 144.6 0.2 0.1
S922-11-051 358.7 143.5 146.2 2.7 11.1
S922-11-052 349.9 148.0 149.2 1.2 0.6
S922-10-054 250.2 147.5 151.1 3.6 8.6
incl 148.2 150.4 2.2 10.5
S922-11-055 351.7 138.0 140.8 2.8 3.2
S922-11-057 293.8 107.5 110.8 3.3 3.7
S922-11-058 211.5 198.6 200.1 1.5 23.9
incl 199.2 199.4 0.2 159.4
S922-11-061 344.4 125.9 129.0 3.1 28.6
S922-11-062 321.9 131.7 133.0 1.3 3.9
S922-11-064 341.1 136.2 142.0 5.8 1.1
S922-11-065 358.4 139.0 141.6 2.6 3.3
incl 175.9 176.6 0.7 161.6
S922-11-072 279.2 175.5 177.8 2.3 5.9
S922-11-076 305.5 146.1 147.1 1.0 5.2
incl 146.4 146.7 0.3 8.5
and 309.3 155.4 156.4 1.0 4.0
incl 155.4 155.7 0.3 11.6
S922-11-078 231.3 174.5 177.5 3.0 20.5
S922-11-079 378.6 161.9 164.4 2.5 6.8
S922-11-080 322.3 117.5 118.0 0.4 0.2
S922-11-081 323.7 106.9 109.7 2.8 0.1
S922-11-082 361.8 136.5 138.0 1.6 24.1
S922-11-084 373.4 143.1 144.3 1.1 13.0
and 384.4 154.7 156.7 2.0 5.9
S922-11-085 350.5 130.1 132.1 2.0 10.2
incl 350.0 130.1 131.0 0.9 22.4
S922-11-086 381.0 150.5 152.1 1.6 7.3
and 392.6 161.6 164.2 2.6 0.2
S922-11-087 272.8 48.5 51.5 3.0 3.9
and 327.7 119.5 122.2 2.7 0.4
S922-11-088 345.8 126.8 130.3 3.5 7.2
S922-11-089 361.6 136.7 139.4 2.8 63.0
incl 136.7 137.4 0.7 240.5
and 365.8 142.0 143.6 1.6 10.5
incl 142.9 143.6 0.7 22.4
and 369.8 146.5 148.0 1.5 5.5
incl 146.5 146.9 0.4 17.5
S922-11-090 347.5 124.5 128.0 3.5 1.8
S922-11-091 362.2 135.6 143.0 7.4 21.7
incl 135.6 137.9 2.3 18.3
incl 139.9 141.8 2.0 59.2
S922-11-092 374.9 143.0 153.2 10.2 1.9
incl 143.4 147.1 3.7 4.5
S922-11-093 371.4 140.9 145.3 4.4 14.6
and 378.9 149.9 152.4 2.5 3.2
S922-11-094 404.5 174.5 177.3 2.8 2.1
S922-11-095 381.5 147.0 149.0 2.0 0.8
S922-11-096 359.4 134.8 137.3 2.5 23.6
S922-11-097 375.2 144.2 149.5 5.3 19.5
and 383.7 154.8 157.8 3.0 7.6
S922-11-098 305.8 144.2 148.3 4.1 4.1
S922-11-099 311.2 138.2 139.6 1.5 4.0
and 314.9 144.6 146.6 2.0 4.8
S922-11-100 334.4 135.5 139.7 4.1 1.8
S922-11-101 349.3 139.2 143.3 4.0 13.0
S922-11-102 365.4 141.5 146.4 4.9 1.3
S922-11-103 336.2 135.1 139.6 4.5 7.3
S922-11-104 352.3 136.3 138.5 2.2 2.4
Drilling Station Surface DDH 007
CD-11-162 No Significant Results 0.0
CD-11-165 No Significant Results 0.0
CD-11-166 No Significant Results 0.0
CD-11-169 269.1 279.5 284.8 5.3 0.9
and 281.1 293.8 295.5 1.7 10.7
incl 293.8 294.7 0.9 18.4
CD-11-200 144.8 199.5 205.1 5.6 0.0
CD-11-202 205.1 223.8 233.9 10.1 0.5
incl 230.7 231.3 0.6 5.3
CD-11-204 196.8 217.8 218.0 0.2 0.1
CD-11-205 199.9 222.6 223.7 1.1 5.5
CD-11-206 225.6 242.1 243.0 0.9 7.0
incl 242.7 243.0 0.3 17.1
CD-11-207 184.7 221.6 225.0 3.4 0.6
incl 224.6 225.0 0.5 4.4
CD-11-208 172.2 222.9 224.5 1.6 0.6
CD-11-209 178.3 217.9 218.1 0.2 2.4
CD-11-210 173.7 218.5 219.3 0.7 1.9
CD-11-211 156.7 213.8 215.6 1.9 0.0
CD-11-212 151.8 195.2 195.7 0.5 10.8
CD-11-217 162.5 205.8 206.9 1.1 11.1
CD-11-218 149.7 198.2 200.5 2.2 3.7
CD-11-222 147.9 196.1 198.5 2.3 0.3
CD-11-223 142.6 196.2 197.8 1.6 0.5
CD-11-227 No Significant Results
CD-11-228 184.1 218.0 221.7 3.7 4.6
CD-11-232 178.9 215.6 216.6 0.9 0.5
CD-11-230 218.2 235.8 239.1 3.3 2.2
CD-11-233 200.9 218.5 219.5 0.9 0.1
CD-11-234 202.4 225.1 225.3 0.2 2.4
CD-11-235 188.7 213.8 214.2 0.4 0.4
CD-11-236 172.2 203.9 204.5 0.6 9.8
CD-11-238 121.6 136.8 142.2 5.4 0.0
CD-11-241 227.1 242.7 249.6 6.9 7.9
and 261.5 280.5 283.8 3.3 10.6
CD-11-242 192.9 216.1 218.7 2.6 0.9
CD-11-244 112.7 137.8 139.3 1.5 0.4
CD-11-245 236.5 259.1 260.3 1.2 5.2
CD-11-246 239.0 265.6 266.9 1.3 4.3
CD-11-248 157.0 188.1 191.4 3.3 0.2
CD-11-250 157.9 198.0 201.0 3.0 1.1
CD-11-251 138.7 187.1 190.7 3.5 1.1
CD-11-252 139.9 206.6 209.7 3.1 0.0
CD-11-253 121.7 199.5 202.4 2.9 4.6
incl 120.9 199.5 199.7 0.2 45.3
CD-11-254 152.9 202.7 205.0 2.3 0.3
CD-11-255 133.5 187.1 189.5 2.4 0.0
CD-11-257 119.5 199.6 202.5 3.0 8.2
incl 199.6 199.8 0.2 120.4
CD-11-259 127.4 189.4 190.8 1.4 10.9
CD-11-262 320.8 336.9 345.6 8.7 3.8
incl 339.2 343.0 3.8 7.4
JH-11-019 361.7 472.4 474.9 2.5 20.3
JH-11-026 326.1 456.6 458.0 1.4 7.6
JH-11-028 370.9 473.1 475.7 2.6 18.6
and 374.9 478.8 480.3 1.6 2.3
JH-11-030 394.3 522.9 525.0 2.2 2.2
JH-11-055 435.0 521.9 526.4 4.5 5.1
(1) Due to the exploratory nature of this exploration program and the variable orientations of the high-grade mineralized zones, the intersections presented herein may not necessarily represent the true width of mineralization.
To view Figure 1, please visit the following link: http://media3.marketwire.com/docs/Figure_1-3D_view_west800.pdf.
To view Figure 2, please visit the following link: http://media3.marketwire.com/docs/Figure%202-007%20Long%20Section-3.pdf.
To view Figure 3, please visit the following link: http://media3.marketwire.com/docs/Figure_3-16_Level_Plan_View.pdf.
To view Figure 4, please visit the following link: http://media3.marketwire.com/docs/Figure_4-3D_view_south800.pdf.
To view Figure 5, please visit the following link: http://media3.marketwire.com/docs/Figure_5-3D_view_all800.pdf.
The TSX and the OTCQX exchanges have not reviewed and do not accept responsibility for the adequacy or accuracy of this release.

Contact Information


San Gold Corporation
Tim Friesen
Communications Director
1 (204) 772-9149 ext. 202

San Gold Corporation
George Pirie
President and CEO
1 (416) 214-0024
www.sangold.ca
Enhanced by Zemanta